NX 2 Lysbord Ultimate compact yet powerful

NX 2 Lysbord

Ultimate compact yet powerful

Varenr: 1330000047
124 254,-eks. mva
Logg inn for å se dine nettopriser.
Ikke kunde? Søk om kundestatus.
1 på lager
BeskrivelseTeknisk infoTilbehørSupport

The NX2 is the ultimate compact yet powerful fully integrated lighting controller. As a member of the innovative ONYX platform from Obsidian Control Systems the NX2 is feature rich and never restricted in its capabilities.  NX2 includes a high-brightness full HD multi-touch screen, 8 assignable parameter encoders, an assistive mini touch-screen, full keypad and command section, a dedicated grandmaster and 10 full playbacks with four freely assignable buttons.

Utilizing the latest in industrial components the NX2 contains a powerful new Intel Hexa-Core processor, high speed NVMe SSD drive and 16GB of DDR4 RAM. Fast boot times, instant operation and the ability to process 64 Universes right inside the console without the need for costly external processing networks result in unprecedented power in this form factor.

The NX2 is ergonomic with its compact footprint, full ONYX command and keypad section and the bright adjustable HD touch screen. It is always ready to run the largest shows and events at a moment’s notice. 

With four DMX ports, Timecode, Midi and dual Gigabit ports for up to 64 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX 2 has all the connectivity and power the ever-increasing sizes of shows demand. Two additional 4K touch monitors are supported for even more direct access at any time.

For powerful visualization of lighting and scenery every NX2 console includes a free CAPTURE Solo Edition license. Register your NX2 at http://obsidiancontrol.com/getcapture

Click here to learn more about NX2 & for all technical details and documentation




Portable and compact fully featured lighting console

Adjustable 15.6” Full HD multi touch screen, 2x external 4K Touch Displays

64 Universe integrated processing

10 Playbacks, 8 Encoders, Keypad and internal 3.5" touchscreen

Network, DMX, Timecode and Midi Connectivity

CAPTURE Solo Edition License



10x 60 mm playback faders, each with 4x function-assignable buttons 

8x customizable multi-function keys 

Playback Select button 

Master Go section with Go, Pause, Snap and Release 

4x digital rotary encoders with push function and status LED for fixture parameter control 

4x screen mounted digital rotary encoders with push function 

3.5" RGB touchscreen for parameter groups, effect parameters, fanning and global timings 

Grand master rotary fader and button 

Blind/HighLight/Last/Next buttons 

Full numerical keypad and command keys 


Industrial 15.6" TFT 16:9 touchscreen (1920x1080px) 

250 GB NVMe M.2 storage drive 

Industrial motherboard with Intel i5 Hexa-Core CPU 

Quiet thermal design using advanced copper heat pipe coolers 


Integrated graphics processor 

Windows 10 IoT Embedded Operating System 

OS installation by USB 3.0 storage device 

Supports Windows USB touchscreens 


4x DMX / RDM Universe In/Out: 5pin locking XLR 

External Display: 2x DisplayPort (up to 4k) 

Network: 2x Gigabit RJ45 Ethernet for Art-Net, sACN and ONYX X-Net 

Storage and Peripherals: 4x USB 3.0, 1x USB 2.0 

Audio Out, Mic In: 2x 3.5mm Jack 

MIDI in/out/thru (MIDI Show Control, MIDI notes, MIDI Timecode): 5pin DIN 

SMPTE Timecode In/Out: 3pin XLR 

12 VDC power supply input: 4pin XLR 

Desk Lamp: XLR 12V 

USB In: USB 2.0 B 


Length: 300 mm (11.9 in.) 

Width: 540 mm (21.3 in.) 

Height: 121 mm (4.8 in.) 

Weight: 9 kg (19.8 lbs.) 


AC mains power to 12VDC external PSU (included)

100-240V nominal, 50/60 Hz 

Maximum current: 3A 

12VDC output: 11A, 132W max. 


RGB LED desk lamp, angular XLR connector, 13" 

Dust Cover 

Obsidian USB Cable 

External PSU (12V 11A) 

1.5 m power cable, 3pin IEC 

USB 3.0 Recovery stick 

CAPTURE Visualizer SOLO License

Lysbord, lysmikser, DMX kontroller

Teknisk info